Panasonic TQBJ0350 - Manual (Page 55)

DISPLAY OPTION menu
ENGLISH -
55
Settings
Use the colorimeter to measure 6 )
the luminance (Y) and chromaticity
coordinates (x, y)
Press ▲▼ to select the colors, and
7 )
press ◄► to select their values.
If [AUTO TEST PATTERN] is turned [ON], z
the test pattern of the selected color is
displayed.
After all the data has been input, 8 )
press
The [ z MEASURED MODE] screen will be
displayed.
Inputting the coordinates of a desired
Q
color
Press ▲▼ to select [TARGET 9 )
DATA].
Press button.
10)
The [TARGET DATA] screen will be z
displayed.
Press ▲▼ to select the desired 11)
colors, and press ◄► to input
their coordinates.
If [AUTO TEST PATTERN] is turned [ON], z
the test pattern of the selected color is
displayed.
After all the data has been input, 12 )
press
Note
If the target data is outside the color range of the z
projector, the colors will not be projected correctly.
COLOR CORRECTION
A different color can be adjusted and stored for each
input signal system.
Press ▲▼ to select [COLOR 1 )
CORRECTION].
Press ◄►to switch [COLOR
2 )
CORRECTION] setting.
The setting will change as follows each time the z
button is pressed.
OFF USER
OFF Standard setting
USER
Can adjust and store six colors
([RED], [GREEN], [BLUE], [CYAN],
[MAGENTA] and [YELLOW]) for
each of the four VIDEO, S-VIDEO,
RGB, and YP
B
P
R
/YC
B
C
R
signaling
systems.
If you have selected [USER] in
J
step 2
Press button. 3 )
The [COLOR CORRECTION] screen is z
displayed.
Press ▲▼ to select [RED], [GREEN], 4 )
[BLUE], [CYAN], [MAGENTA] and
[YELLOW].
Press ◄► to adjust.
5 )
The adjustable range is -30 to +30. z
SCREEN SETTING
Set this in accordance with the screen you are using.
When the projection image aspect ratio is changed,
the projector makes corrections to ensure the optimal
images for the set screen size.
Press ▲▼ to select [SCREEN 1 )
SETTING].
Press button.
2 )
The [SCREEN SETTING] screen will be z
displayed.
Press ◄► to switch [SCREEN 3 )
FORMAT].
PT-DZ570E
J
16 : 10 4 : 3 16 : 9
J
PT-DW530E
16 : 9 16 : 10
PT-DX500E
J
4 : 3 16 : 9
Press ◄► to adjust [SCREEN 4 )
POSITION].
In the case of the PT-DZ570E : z
When [SCREEN FORMAT] is [16 : 9]
Adjustment range: -60 to +60
When [SCREEN FORMAT] is [4 : 3]
Adjustment range: -160 to +160
In the case of the PT-DW530E, you can adjust z
the setting from -132 to +131.
Note
[SCREEN POSITION] cannot be adjusted z
when [SCREEN FORMAT] is [16 : 10]
(PT-DZ570E/PT-DW530E) or [4 : 3] (PT-DX500E).