Panasonic TQBJ0350 - Manual (Page 46)

PICTURE menu
46
- ENGLISH
Settings
SHARPNESS
This adjusts the sharpness of the pictures.
Press ▲▼ to select [SHARPNESS]. 1 )
Press ◄► or button. 2 )
The [SHARPNESS] individual adjustment z
screen will be displayed.
Press ◄► to adjust the level. 3 )
Operation Adjustment
Adjustment
range
Press ►.
Contours become
sharper.
0 - 15
Press ◄.
Contours become
softer.
NOISE REDUCTION
This can be used to adjust pictures if they contain
interference as a result of poor quality of the input
signal.
Press ▲▼ to select [NOISE 1 )
REDUCTION].
Press ◄► or button.
2 )
The [NOISE REDUCTION] individual z
adjustment screen will be displayed.
Press ◄► to switch [NOISE 3 )
REDUCTION].
The setting will change as follows each time z
◄► is pressed.
1 (Low) 2 (Medium)
OFF (No correction) 3 (High)
Attention
[NOISE REDUCTION] is set active when the selected z
input signal has less noise. Applying noise reduction may
affect the image quality, if so, set to [OFF].
AI
Gray scale control is exercised to suit the images, and
optimal images with a clear contrast are projected.
Press ▲▼ to select [AI]. 1 )
Press ◄► to switch [AI]. 2 )
The setting will change as follows each time z
◄► is pressed.
ON OFF
ON AI compensation is enabled.
OFF AI compensation is disabled.
DAYLIGHT VIEW
This corrects images so that they appear vivid when
projected under bright lighting.
Press ▲▼ to select [DAYLIGHT VIEW]. 1 )
Press ◄► or button. 2 )
The [DAYLIGHT VIEW] individual adjustment z
screen will be displayed.
Press ◄► to switch [DAYLIGHT VIEW]. 3 )
The setting will change as follows each time z
◄► is pressed.
OFF (No correction) 1 (Low) 2 (Medium)
AUTO 3 (High)