Panasonic TQBJ0350 - Manual (Page 19)

ENGLISH -
19
Preparation
About Your Projector
Attention
Do not drop the remote control. z
Avoid contact with liquids or moisture. z
Do not attempt to modify or disassemble the remote control. z
Do not let strong light shine onto the signal receptor. The remote control may malfunction under strong light such as z
fluorescent.
Note
The remote control can be used within a distance of about 15 m if pointed directly at the remote control receiver. The z
remote control can control at angles of up to ± 15 °C vertically and ± 30 °C horizontally, but the effective control range may
be reduced.
If there are any obstacles between the remote control and the remote control signal receptor, the remote control may not z
operate correctly.
The signal will be reflected off the screen. The operating range may differ due to the screen material.
When the projector receives a signal from the remote control, the Power indicator will flash. z
Remote control
J
Top view
J
Front view
Installing/removing batteries
Press the tab and lift up the
cover.
Insert the batteries according to
the polarity diagram indicated
inside. (insert the side first).
Remove the batteries in the
reverse order to setting.
Remote control
signal emitters
Remote control indicator
Flashes by pressing any buttons
Switch between stand-by mode and projection mode.
These buttons select the RGB1, RGB2, DVI-D, VIDEO, S-VIDEO and HDMI terminals.
( Æ page 37)
Displays and clears the main menu, and returns to the previous menu when the menu
is displayed.( Æ page 40)
Temporarily freezes video and audio. ( Æ page 37)
Restores the default factory setting. ( Æ page 40)
Assign the frequently use functions from options for shortcut. ( Æ page 38)
Specifies the ID of the remote control. ( Æ page 22)
Makes the remote control available to control any ID projectors. ( Æ page 22)
Pressing this button while projecting an image automatically corrects the picture
positioning on the screen. While the auto setup feature is active, a message
“PROGRESS” appears on the screen. ( Æ page 38)
Navigate through the menu items with ▲▼◄►, and activate them with the
button. ( Æ page 40)
Turn off the projection temporarily. ( Æ page 37)
Opens [ECO MANAGEMENT] menu. ( Æ page 38)
Control to adjust the volume of the speaker. ( Æ page 39)
You can attach
a favourite
strap onto the
remote control.