Panasonic TQBJ0350 - Manual (Page 37)

ENGLISH -
37
Basic Operation
Basic operations using the remote control
Using the AV MUTE function
If the projector is not used for a certain period of
time during the meeting intermission, for example, a
AV MUTE mode is available that allows the user to
hide images temporarily.
button
Press button on the 1 )
remote control or the main unit.
The projected light is blocked by the internal z
shutter.
Press button again. 2 )
Projection resumes. z
Note
The power indicator will flash while the AV MUTE function z
is being used.
Capturing an image
You can freeze the projected image and stop the
sound temporarily, regardless of the playing condition
of the connected device.
button
Press the button again to escape.
Switching the input signal
You can use the remote control to switch the signals
that are being input and projected.
button
Press button on the
remote control or the main unit.
RGB1 Switches to RGB1 input.
RGB2 Switches to RGB2 input.
DVI-D Switches to DVI-D input.
VIDEO/
S-VIDEO
Switches to VIDEO or S-VIDEO input.
If either of the inputs has already
been selected, the input switches to
the other.
NETWORK Switches to NETWORK input.
HDMI Switches to HDMI input.