Linear DUAL 824 - Manual (Page 29)

27
MAKING A SENSOR A 24-HOUR DOOR CHIME
✦ Sensors can be programmed to cause the
keypad(s) to chime any time they're activated.
✦ Chime-only sensors will not be able to trigger the
alarm in any system mode.
✦ The sensor must have already been programmed
into the Control Panel (see “Adding Sensors to
the System” for details).
1. Start with the system in Test Mode.
2. Enter the master user code then press TEST.
✴ A “Gong” and fi ve “Beeps” will sound.
✴ The sensor status indicators will light for each sensor
programmed into the Control Panel.
3. Enter the sensor number from 01-24 (you must
enter two digits, example: 5 = 05).
✴ The sensor status indicator light will fl ash for the sensor
number selected.
4. Press HOME, 8, then AWAY.
✴ A “Bing” tone will sound and the sensor status indicator
will light steady.
5. Enter another sensor number, or exit Setup
Mode by pressing the key then press OFF for
three seconds.
MAKING A SENSOR INTERIOR
✦ Wireless motion detectors are automatically
programmed as interior sensors. Any other
sensor can also be programmed as an interior
sensor.
✦ Interior sensors can only trigger an alarm when
the system is in the Away Mode.
✦ “Home Interior” sensors can trigger an alarm
when the Control Panel is in the Home or Away
mode.
✦ The sensor must have already been programmed
into the Control Panel (see “Adding Sensors to
the System” for details).
1. Start with the system in Test Mode.
2. Enter the master user code then press TEST.
✴ A “Gong” and fi ve “Beeps” will sound.
✴ The sensor status indicators will light for each sensor
programmed into the Control Panel.
3. Enter the sensor number from 01-24 (you must
enter two digits, example: 5 = 05).
✴ The sensor status indicator light will fl ash for the sensor
number selected.
4. Press HOME, 7, then AWAY.
✴ A “Bing” tone will sound and the sensor status indicator
will light steady.
5. Enter another sensor number, or exit Setup
Mode by pressing the key then press OFF for
three seconds.
START IN TEST
MASTER
USER
CODE
1 GONG & 5 BEEPS
(SETUP MODE)
NUMBER OF
SENSOR
TO CHANGE
SENSOR
INDICATOR
FLASHES
ENTERS SENSOR
NUMBER
8 TO SELECT CHIME
SENSOR FUNCTION
STORES CHANGE
1 BING AND SENSOR
INDICATOR LIT
START IN TEST
MASTER
USER
CODE
1 GONG & 5 BEEPS
(SETUP MODE)
NUMBER OF
SENSOR
TO CHANGE
SENSOR
INDICATOR
FLASHES
ENTERS SENSOR
NUMBER
7 TO SELECT
INTERIOR SENSOR
FUNCTION
STORES CHANGE
1 BING AND SENSOR
INDICATOR LIT