Linear DUAL 824 - Manual (Page 22)

20
✦ The system can be customized for the specifi c
installation.
✦ A label sheet with sensor location names is
provided with DUAL 824KP keypads.
✦ Labeling the sensors allows quick and easy
identifi cation of where a door or window is open,
where any alarms have occurred, where a
sensor with a low battery is, or where a sensor
with trouble is.
LABELING THE SENSOR LOCATIONS
1. Open the keypad's plastic beauty cover to reveal
the sensor identifi cation label area.
2. Open one protected door/window to light its
sensor status light on the keypad(s).
3. Choose a label that describes the sensor
location, or write the location on a blank label,
and stick it in the area next to the sensor number.
4. Close the protected opening that you just
labeled.
5. Repeat for each protected opening.
6. Stick the WIRELESS KEYPAD label in the sensor
number location for the wireless keypad (if used).
7. Close the beauty cover when fi nished.
9. CUSTOMIZING THE KEYPAD
PULL TAB TO
OPEN BEAUTY
COVER
OPEN DOOR OR WINDOW TO
LIGHT SENSOR STATUS
INDICATOR ON KEYPAD(S)
USE SENSOR
LABELS SUPPLIED
TO IDENTIFY EACH
SENSOR LOCATION
USE AN INK PEN TO
CUSTOMIZE BLANK
LABELS
APPLY THE PRE-PRINTED SENSOR
LOCATION LABELS TO SUIT THE
INSTALLATION
BLANK LABELS THAT CAN BE FILLED IN
WITH AN INK PEN ARE ALSO PROVIDED
FOR CUSTOM SENSOR IDENTIFICATION