KORG MP-10 PRO - Manual (Page 39)

Connecting and setting the pedals 35
Connecting and setting the pedals
You can connect two pedals to the MP-10 PRO: a Damper pedal (to be used
to sustain Sounds such as a Grand Piano), and an Assignable pedal (either an
expression-type pedal or a footswitch pedal, that you can freely program) .
Connecting an expression pedal/footswitch
The ASSIGN connector allows for either an expression-type pedal or a foot-
switch to be connected .
A footswitch is used to send control functions, and remotely control the MP-
10 PRO without having to raise your hands from the keyboard (or any other
instrument that you’re playing) .
An expression pedal is used to control either the master volume, or the key-
board volume .
Connect the pedal or footswitch to the ASSIGN pedal connector, then assign
it a function. If it is the first time you connect it, you should also calibrate it.
Assigning a function to the pedal/footswitch
You can assign a function to the pedal/footswitch .
1. Press the GLOBAL button to access the Global Menu.