KORG MP-10 PRO - Manual (Page 126)

122 Part 8: The Microphone
Part 8: The Microphone
Two microphone inputs are provided to mix in two singers or one singer and
the MC .
• The MIC 1 input is processed by the MP-10 PRO’s studio quality effect
processor (with vocal effects provided by TC-Helicon), and is dedicated to the
lead vocals. On this input you can have level and pan controls, low cut filter-
ing, dynamics control, equalization, harmonization, delay and reverb .
• The MIC 2 will instead be processed by more ‘generic’ effects, and is better
suited to, for example, an acoustic guitar or to backing vocals . On this input
you can have level and pan controls, equalization and reverb .
Connecting the microphones and setting the gain
Connect the microphones, then set their input gain .
Connecting the microphones
Turn down the MP-10 PRO’s master volume level, then connect one or two dy-
namic microphones . (To connect condenser microphones, you need an external
source of phantom power, for example a small mixer) .