KORG MP-10 PRO - Manual (Page 128)

124 Part 8: The Microphone
Adjusting the microphone’s volume
After setting the input gain, adjust the volume of the microphones in the mix .
Adjusting the volume of each microphone
Use the MIC volume level controls on the front panel to mix the microphone
with the other sound sources .
1. Play a Song, and/or play some Sounds on the keyboard (if is it connected) .
2. While the other sound sources (Songs, Sounds) are playing, sing or speak
into the microphone .
3. Use the corresponding MIC level control to adjust the microphone level .
Note: The microphones’ level controls can also be accessed via the Mixer > Voice
Processor Setup page.
While turning the MIC knob clockwise, check the level in the master vol-
ume indicator on the control panel . The indicator should stay in the orange
area while you sing or play at the maximum level and dynamics .
Don’t let the level indicator go into the red , or the audio signal will distort .
If the red indicator turns on, lower the MIC level a little, until the indicator
returns to the orange area .