Changing resolution and brightness – Kodak ESP OFFICE 2100 User Manual
Page 96
Faxing
90
www.kodak.com/go/aiosupport
Changing resolution and brightness
Before sending your fax, change the resolution and brightness settings, as needed,
based on your original.
To modify settings before sending your fax:
1. Press
Fax.
2. With
Fax Options selected, press OK.
3. Press
to
select
Resolution.
The resolution setting determines the amount of detail that is transmitted.
Select:
•
Standard (default) for most documents
•
Fine for documents with fine print
•
Photo for photographs
4. Press
to
select
Brightness.
Adjust the brightness setting according to how light or dark your original is.
Select:
•
Normal (default) for most documents
•
+1 to +3 to lighten dark originals
•
-1 to -3 to darken light originals
NOTE: If you do not want to save these settings for future faxes, send your fax. The
settings will apply only to the current transmission. If you want to save these
settings as defaults:
a. Press
to select
Save as Defaults, then press OK.
b. Select
Yes, then press OK.