Kodak ESP OFFICE 2100 - Manual (Page 18)

Networking Your Printer
12 www.kodak.com/go/aiosupport
Installing your printer on additional computers on the network
To add your printer to another computer(s) on your network, install the KODAK
All-in-One Printer Software on each computer.
• Insert the CD that came with the printer into the computer CD drive, and follow
the on-screen instructions. When the software checks for updates, if a newer
version exists, install the newer version. (On a computer with MAC OS, be sure
to select the option to check for newer versions.)
NOTE: If you do not have the CD:
a. Go to www.kodak.com/go/aiodownloads .
b. In the results list, click the link for KODAK All-in-One Printer Software
for your computer’s operating system.
c. Follow the on-screen instructions.
Connecting to another KODAK All-in-One Printer
If you are connecting to a newer model printer (for example, you have an ESP 7
printer and now you are adding an ESP Office 2150 printer), you must install the
KODAK All-in-One Printer Software for the newer model.
NOTE: When you install the new software, the printer driver for the ESP 7 printer
will be uninstalled, and an upgraded driver for the ESP 7 printer will be
installed in addition to the driver for the ESP Office 2150 printer.
On a computer with WINDOWS OS:
1. Select Start > All Programs > Kodak > KODAK Printer Setup Utility.
• If your wireless printer (example: KodakESPOffice2150+0034) is not listed:
a. Select No, my printer is not listed, then click Next.
b. From the drop-down list, select your printer.
c. Select Network - Wireless/Wi-Fi, then click Next.
When your printer is detected, driver installation begins.
• If your wireless all-in-one printer (example: KodakESPOffice2150+0034) is
listed:
a. Select the all-in-one printer that is connected to your network.
b. Select Yes, my printer is listed, then click Next.
When your printer is detected, driver installation begins.
2. When driver installation is complete, click Done.
On a computer with MAC OS:
1. Select Apple > System Preferences.
2. Under Hardware, select Print & Fax or Print & Scan.
3. Click + in the dialog box.
4. Select your printer from the list.
5. Click Add, if required.