Kodak ESP OFFICE 2100 - Manual (Page 89)

www.kodak.com/go/aiosupport 83
KODAK ESP Office 2100 Series All-in-One Printer
Selecting fax settings
Before sending or receiving faxes, set the fax options.
1. Press Home.
2. Press to select Fax Settings, then press OK.
3. Press or to select an option, then press or to change the option.
Fax Setting Options Description
Fax Sender
Information -- This information appears on the faxes
you send.
Press OK, then enter the fax sender
name (your name), your fax number, and
your phone number (see
Using the
numeric keypad on the control panel to
enter text and/or numbers, page 88
);
press OK to save.
Rings to Answer 1 to 6 (default is 4) The number of times that your phone will
ring before the printer picks up the call.
If you use a dedicated phone line for your
printer, set the Rings to Answer to any
setting. If the printer shares the phone
line with an answering machine, set the
Rings to Answer to a higher number (5
or 6) than the rings to answer for the
answering machine (typically 4 rings).
This allows the answering machine to
pick up phone calls. The printer will
monitor the line after the answering
machine picks up, and, if set to Auto
Answer, will detect an incoming fax and
receive it.
Redial if No Answer Yes (default) / No If the fax number you call does not
answer, the printer will redial the number
once automatically.
Busy Redial
Attempts 0 to 12
(default is 5)
The number of times that the fax will
attempt to redial a busy number.