Kodak ESP OFFICE 2100 - Manual (Page 64)

58 www.kodak.com/go/aiosupport
7
Copying
You can copy documents and photos with your all-in-one printer. The printer
produces high-quality color or black-and-white copies on a variety of paper types
(see
Paper types, page 35 ).
Loading originals for copying
To copy documents (up to 25 pages) on plain paper, load the original(s) in the
Automatic Document Feeder (ADF).
IMPORTANT: The ADF accepts plain paper originals from 6.9 to 8.5 in. (18 to 22 cm) wide
and 9.8 to 14 in. (25 to 36 cm) long.
To copy a photo, documents on thick paper, or a document that is too small or too
large to fit in the ADF, place the original face down on the scanner glass.
For more information on loading originals, see Loading originals, page 41 .
Copying a document
You can copy a document using the default settings, or you can adjust the quantity,
size, quality, and brightness of your copies.
Using the default settings to copy a document
The default settings are either the factory default settings (see Resetting factory
defaults, page 107 ), or defaults that you have set on the printer (see the bottom of
the table under Adjusting the settings and copying a document, page 59 ).
To copy a document using the current default settings:
1. Place the original document in the ADF or on the scanner glass.
2. Press Copy .
3. Press Start Black to make a black-and-white copy, or press Start Color to make a
color copy.
NOTE: If you load the original document in the ADF, the ADF automatically feeds
the document into the printer when you begin copying.