Sun Microsystems Sun Fire X4100 - Manual (Page 194)

4-64 Sun Fire X4100 and Sun Fire X4200 Servers Service Manual • June 2006
7. Install a PCI card:
a. Working from the rear of the chassis, pivot the PCI card latch for the slot open
to receive the new PCI card. See FIGURE 4-58 .
b. Insert the PCI card into the PCI card slot. Ensure that the PCI card's rear
connector panel engages the tab in the chassis rear panel. See FIGURE 4-60 .
FIGURE 4-60 Installing a PCI Card
c. Pivot the PCI card latch closed over the rear connector panel of the PCI card
until it locks. See FIGURE 4-60 .