Sun Microsystems Sun Fire X4100 - Manual (Page 163)

Chapter 4 Maintaining the Sun Fire X4200 Server 4-33
Note – In the following figures, the server is shown from a rear view with the front
cover off and all fans removed to provide visibility.
FIGURE 4-27 Unfastening the Fan Connector Board Securing Screw
b. Slide each fan connector board toward the center of the chassis, to disconnect
them from the front I/O board and to release each board from the locating tabs
on the chassis. See
FIGURE 4-28 .
c. Lift the fan connector boards straight up to remove them from the system.