Sun Microsystems Sun Fire X4100 - Manual (Page 172)

4-42 Sun Fire X4100 and Sun Fire X4200 Servers Service Manual • June 2006
Note – If the HDDs were previously configured as a mirrored RAID 1 array, an
automatic resynchronization is invoked and the contents are automatically rebuilt
from the rest of the array with no need to reconfigure the RAID parameters. If the
bad HDD was configured as a hot-spare, the new HDD is automatically configured
as a new hot-spare.
Note – When you install a HDD, open its securing latch before you push the drive
into the bay. Push the HDD into the bay until it stops, then close the securing latch
to fully engage the connector on the HDD backplane.