Sun Microsystems Sun Fire X4100 - Manual (Page 125)

Chapter 3 Maintaining the Sun Fire X4100 Server 3-65
3. Remove the power supply:
a. Grasp the power supply handle and push the thumb latch toward the center of
the power supply. See FIGURE 3-61 .
b. While continuing to push on the latch, use the handle to remove the power
supply from the chassis.
FIGURE 3-61 Removing a Power Supply
Installation is the reverse of this procedure.
Note – When installing a new power supply, press it into the bay until the thumb
latch clicks, indicating that it is locked.