Sharp MX-C401 - Manual (Page 734)

7-33
SYSTEM SETTINGS
Contents
Copy Function Settings
Item Factory default setting Page
■
Copy Function Settings
7-64
● Initial Status Settings
7-64
X Color Mode Full Color
X Paper Tray Varies depending on the machine
configuration
X Exposure Type Auto
X Copy Ratio 100%
X 2-Sided Copy 1-Side to 1-Side
X Output –
● Other Settings 7-65
X Copy Exposure Adjustment
7-65 ‹ Color 5
‹ Black & White 5
X Add or Change Extra Preset Ratios – 7-65
X Setting a Maximum Number of Copies 999 7-65
X Initial Margin Shift Setting
7-65 ‹ Side 1 1/2"
‹ Side 2 1/2"
X Erase Width Adjustment
7-65
‹ Edge Clearance Width 1/2"
X Card Shot Settings
7-65 ‹ Original Size X: 3-3/8", Y: 2-1/8"
‹ Fit to Page Disabled
X Disabling Deletion of Job Programs Disabled 7-65
X Disabling of Bypass-Tray in Duplex Copy Disabled 7-65
X Disabling of Auto Paper Selection Disabled 7-65
X Auto Selection of Paper Tray that was Last Loaded Disabled 7-66
X Color 600dpi x 600dpi Scanning Mode for Document Feeder Enabled 7-66
X Color Quick Scan from Document Glass Disabled 7-66
X B/W 600dpi x 600dpi Scanning Mode for Document Feeder Enabled 7-66
X B/W Quick Scan from Document Glass Disabled 7-66
● Color Adjustments 7-67
X
Initial Color Balance Setting Factory default 7-67
X Auto Color Calibration – 7-67