Sharp MX-C401 - Manual (Page 46)

43
REPLACING SUPPLIES AND MAINTENANCE
Cleaning the laser unit
When the laser unit inside the machine becomes dirty, line patterns (colored
lines) may form in the printed image. Follow the steps below to clean the laser
unit.
Identifying lines (colored lines) caused by a dirty laser unit
• Colored lines always appear in the same place. (The lines are never black.)
• The colored lines are parallel to the direction of paper feeding.
• Colored lines appear not only on copies but also on print jobs from a
computer. (The same lines appear on both copies and print jobs.)
Colored line
Direction of
paper feeding
1
Press the [POWER] key ( ) on the operation panel
to turn off the panel power, and then switch the
main power switch to the off position.
mxc401_us_saf.book 43 ページ ２００８年１０月１５日 水曜日 午前１１時５２分