Sharp MX-C401 - Manual (Page 40)

37
REPLACING SUPPLIES AND MAINTENANCE
Cleaning the bypass tray rollers
If you find that paper fed from the bypass tray misfeeds or is soiled by the roller,
remove and clean the roller. If misfeeds or soiling continue to occur, replace the
roller.
Before starting, remove the paper from the bypass tray.
1
Press the [POWER] key ( ) on the operation panel
to turn off the panel power, and then switch the
main power switch to the off position.
2
Remove the roller cover from the bypass tray.
Place your fingers behind the marks on the roller cover and pull straight
toward you.
Marks
mxc401_us_saf.book 37 ページ ２００８年１０月１５日 水曜日 午前１１時５２分