Sun Microsystems FC Switch-8 and Switch-16 816-0830-12 - Manual (Page 39)

Chapter 2 Configurations 9
Sun StorEdge A5000 and A5100 arrays are not supported.
TABLE 2-2 Sun StorEdge A5200 Array
Feature Supported
Cascading No
Zone type SL zone only
Maximum number of arrays per SL zone 3
Maximum initiators per SL zone 2
Maximum initiators per array 4 (2 per loop)
Split loop support No
TABLE 2-3 Sun StorEdge T3 Array and T3+ Array
Feature Supported
Cascading Yes
Zone Type nameserver zone 1 , SL zone
1. The host must be connected to the F-Port on the switch; Sun StorEdge T3 array must be connected to the TL port
of the switch.
Maximum number of arrays per zone 8
Maximum initiators per LUN 2
Maximum initiators per zone 2 2
2. This implies 2 initiators (2 hosts) for simple arrays (T3WG), but 4 initiators (2 hosts) for a partner pair (T3ES).
Each host has one path to each of the Sun StorEdge T3 arrays in the partner pair.