Sun Microsystems FC Switch-8 and Switch-16 816-0830-12 User Manual
Page 145
Chapter 8
Configuring the SAN
115
Note –
This operation repeats the
unconfigure
command of an individual device
for all the all devices on c2, and it can be time consuming if the number of devices
on c2 is large
4. Verify that all of the devices on c2 are unconfigured.
Notice that the Occupant column of c2 and all the devices attached to it are listed as
unconfigured.
# cfgadm -al
Ap_Id
Type
Receptacle
Occupant
Condition
c0
fc-fabric
connected
configured unknown
c0::50020f2300006077 disk
connected
configured unknown
c0::50020f23000063a9 disk
connected
configured unknown
c1
fc-private
connected
configured
unknown
c1::220203708b69c32b disk
connected
configured
unknown
c1::220203708ba7d832 disk
connected
configured
unknown
c1::220203708b8d45f2 disk
connected
configured
unknown
c1::220203708b9b20b2 disk
connected
configured
unknown
c2
fc-fabric
connected
unconfigured unknown
c2::50020f2300005f24 disk
connected
unconfigured unknown
c2::50020f2300006107 disk
connected
unconfigured unknown