Sun Microsystems FC Switch-8 and Switch-16 816-0830-12 User Manual
Page 127
Chapter 8
Configuring the SAN
97
▼
To Unconfigure All Fabric Devices on a Fabric-Connected
Host Port
This procedure describes how to unconfigure all configured Fabric devices that are
attached to a Fabric-connected host port.
1. Become superuser.
2. Identify the Fabric devices to be unconfigured.
Only the devices on a Fabric-connected host port can be unconfigured.
3. Unconfigure all of the configured Fabric devices on a selected port.
Note –
This operation repeats the
unconfigure
operation of an individual device
for all the devices on
c0,
and it can be time consuming if the number of devices on
c0 is large.
# cfgadm -al
Ap_Id
Type
Receptacle
Occupant
Condition
c0
fc-fabric
connected
configured unknown
c0::50020f2300006077 disk
connected
configured unknown
c0::50020f23000063a9 disk
connected
configured unknown
c0::50020f2300005f24 disk
connected
configured unknown
c0::50020f2300006107 disk
connected
configured unknown
c1
fc-private
connected
configured
unknown
c1::220203708b69c32b disk
connected
configured
unknown
c1::220203708ba7d832 disk
connected
configured
unknown
c1::220203708b8d45f2 disk
connected
configured
unknown
c1::220203708b9b20b2 disk
connected
configured
unknown
# cfgadm -c unconfigure c0