Sun Microsystems FC Switch-8 and Switch-16 816-0830-12 User Manual
Page 137
Chapter 8
Configuring the SAN
107
An attachment point id (Ap_Id) on a Fabric-connected host port is a path to a Sun
StorEdge Traffic Manager device. Only the devices on a Fabric-connected host port
can be unconfigured through the
cfgadm unconfigure
command.
CODE EXAMPLE 8-5
In
, c0::50020f2300006077 and c2::50020f2300006107 attachment
point IDs represent different port WWNs for the same device such as a Sun StorEdge
T3 enterprise array.
3. Unconfigure the attachment point ID associated with Sun StorEdge Traffic
Manager device.
Note –
If the attachment point ID represents the last configured path to the Sun
StorEdge Traffic Manager device, stop all activity to it and unmount any filesystms
on it. If the device is under any volume manager’s control, see the documentation
for your volume manager for maintaining the Fabric device.
# cfgadm -al
Ap_Id
Type
Receptacle
Occupant
Condition
c0
fc-fabric
connected
configured unknown
c0::50020f2300006077 disk
connected
configured
unknown
c0::50020f23000063a9 disk
connected
configured
unknown
c1
fc-private
connected
configured
unknown
c1::220203708b69c32b disk
connected
configured
unknown
c1::220203708ba7d832 disk
connected
configured
unknown
c1::220203708b8d45f2 disk
connected
configured
unknown
c1::220203708b9b20b2 disk
connected
configured
unknown
c2
fc-fabric
connected
configured unknown
c2::50020f2300005f24 disk
connected
configured
unknown
c2::50020f2300006107 disk
connected
configured
unknown
# cfgadm -c unconfigure c2::50020f2300006107