Siemens SXG75 - Manual (Page 32)

31 Calling
right page (31) of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12)
© Sie
m
ens AG 20
03, C:
\Siemens\
D
TP
-Sa
tz\P
rod
ukte\
SX
G
75_
Wolf
_5_1
\out-
Te
mplate: X75, V
ersion
2.
2;VAR
La
ngu
age: en; VAR
issue d
ate
: 050
902
Setting the volume
+ / - Regulate the volume (on-
ly possible during a call).
If a Car Kit is used, its volume setting
will not affect the usual setting on
the phone.
Redialling previous
numbers
To enter the Dialled calls list (in stand-
by mode):
A
Press the Call key.
To redial the number last called:
A Press the Call key again
(not in video call mode).
Or
j
Press the video call key to
make a video call.
To redial other numbers that were
dialled previously:
I Pick out the number from
the list.
A Press the Call key (not in
video call mode).
Or
j
Press the video call key
to make a video call.
Accepting a call
The phone must be switched on.
An incoming call is indicated by a
special screen:
A number and the name of the caller
transmitted by the network will be
displayed if the number is saved in
the contacts. A picture of the caller
may also be displayed (page 38).
If the incoming call is a video call a
video of the caller is displayed. How-
ever, the transmission of the video
may be suppressed by the caller.
A
Press.
Or
C
Press.
Or
j
Press to accept a video call.
Additional information
* Press and hold to switch
microphone off.
International dialling codes
0 Press and hold until a "+" is
displayed.
Number memo
You can enter a number during the call. The
person to whom you are speaking can hear
these entries. When the connection has
ended you can save or dial the number.