Charging the battery, Charging time – Siemens SXG75 User Manual

Page 13

Getting started

03, C:

\Siemens\

-Sa

tz\P

rod

ukte\

75_

Wolf

_5_1

\out-

left page (12)

of SXG75, FUG en, A31008-H8900-A1-1-7619 (20.09.2005, 09:12)

mplate: X75, V

ersion

2;VAR

La
ngu
age: en; VAR

issue d

ate

: 050

902

• Press on the tray. The tray for the

card is opened. You can remove

the tray.

• Insert the card on the tray (ensure

that the chamfered corner is in the

correct position

1). Insert the tray

with the card into the phone

until it snaps in.

Charging the battery

The battery is not fully charged

when delivered. Plug the charger

cable into the bottom of the phone,

plug the power supply unit into a

mains power socket and charge for

at least two hours.
Only use the plug-in power supply

included in delivery!
As an alternative, the battery can

be charged via the USB port

(Accessories, page 135).

Display during charging.

Charging time

An empty battery is fully charged af-

ter about 2 hours. Charging is only

possible within a temperature range

of +5 °C to 45 °C. If the temperature

rises/falls 5 °C above/below this, the

charge symbol flashes a warning.

The mains voltage specified on the

power supply unit must not be ex-

ceeded.
The charge level of the battery is

only displayed correctly after an un-

interrupted charging/discharging

cycle. You should therfore not remove

the battery unnecessarily

and where

possible not end the charging process

prematurely

Additional information
The power supply unit heats up when used

for long periods. This is normal and not

dangerous.
If the battery is removed for longer than

30 seconds, the clock must be reset.