Sonance DAB1 - Manual (Page 31)

31
DAB1 DISTRIBUTED AUDIO SYSTEM
6. Open the F ILE menu and
select J OB I NFO :
• The D EALER tab ( Figure 39)
allows you to record
information about the
particular job, including
system design notes,
firmware upgrades, etc.
This information is not
transferred to the DAB1 — it
is saved only in the system
program file in your
computer.
• The C LIENT tab ( Figure 40)
gives you a place to record
your client’s contact
information, along with
information about the
general contractor, interior
designer. etc. Like the
D
EALER information, the C LIENT information is saved only in the system program file in your computer and is not transferred
to the DAB1.
R e n a m i n g D A B 1 s i n a S y s t e m w i t h M u l t i p l e U n i t s
To minimize confusion when programming systems with multiple DAB1s we
recommend that you rename each unit to identify it, such as “DAB1 #1 Zones 1-6”, and
“DAB1 #2, Zones 7-12”.
In the S
YSTEM W ORKSPACE area of the Device screen (see Figure 41), select each
DAB1 in the system and rename each one with a different name.
Figure 39:
J OB I NFO Screen D EALER Tab
Figure 40:
J OB I NFO Screen C LIENT Tab
System
Workspace
Area
Figure 41:
The S YSTEM W ORKSPACE Area