Sonance DAB1 - Manual (Page 30)

30
DAB1 DISTRIBUTED AUDIO SYSTEM
Creating a New DAB1 System
1. Launch S ONANCE C ONTROL M ANAGER . An empty S ONANCE C ONTROL M ANAGER screen will
appear.
2. Open the F ILE menu and select N EW to create a new system. Choose a name for the
system and save it.
3. The A DD D EVICE box ( Figure 36) will appear. Select DAB1. The D EVICE screen
( Figure 37) will appear.
4. Open the D EVICE menu and select G ENERAL S ETUP . The G ENERAL S ETUP screen ( Figure 38)
will appear.
• Check the box if you want to activate the Paging function for this DAB1
(see page 17).
• If the system will incorporate more than one DAB1, use the drop-down box to assign a different U NIT ID number to each
DAB1.
5. If the system will have multiple DAB1s, repeat Steps 3 & 4 for each unit in the system.
• See pages 16 – 17 for information about linking the S YNC connections, P AGING connections and IR connections of
multiple DAB1s together in a system.
Figure 36:
A DD D EVICE Box
Figure 37:
D EVICE Screen
Figure 38:
G ENERAL S ETUP Screen