Siemens Gigaset 75 - Manual (Page 9)

5
Getting started
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01
Step
by
Step
Getting started
Connecting the base station
V socket: insert in the ISDN connection cable until the plug locks into place.
Insert in the ISDN connection cable in the ISDN socket until the plug locks into
place.
In the case of NTBA with self-assembly, insert the cable between the NTBA
and the TAE (old telephone socket) until both plugs lock into place.
socket: insert the mains connection cable securely into the plug and insert
the plug into the socket.
If required, connect the PC via USB cable to the USB bus (only supported with
Windows 98).
Profiset talk&surf:
It is not possible to install Profiset talk&surf and Gigaset talk&surf simultane-
ously on the same PC. Otherwise, problems will occur as both programs at-
tempt to access the same interface. You must therefore choose either Gigaset
talk&surf or Profiset Talk&surf. When upgrading, the old program version must
first be deinstalled.
21
22
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
Only the plug-in power supply unit provided should be used (see un-
derside of base station).
£ Power failure:
In the event of a power failure, your base station, the handsets which
are registered at it and any corded terminals are not operational. All set-
tings and saved information (messages, directory entries) are retained
for an unlimited period.