H2.pb - setting a timer, H2 - picking up a call from an answering machine, Setting a timer – Siemens Gigaset 75 User Manual
Page 52: Picking up a call from an answering machine, Answering machine (3075isdn only), Activating/deactivating the timer, Setting the start time (monday - friday), Setting "saturday - sunday" mode, Activating/deactivating automatic am pickup, Picking up a call
48
Answering machine (3075isdn only)
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619
giga3070KAP.fm
09.01.01
Step
by
Step
Setting a timer
You can control your answering machine with a timer function. A start time can
be defined for each announcement. You can also implement timed announce-
ment control for weekends and/or weekdays, and select a specific announce-
ment in each case.
Example: A company has an emergency service outside of regular business
hours. However the announcement at weekends must differ from the an-
nouncement during the week. The following setting would be appropriate in
this case: Mon - Fri after 07:00 pm until 07:00 am: an announcement specifying
the emergency number. Sat + Sun after 07:00 am until 07:00 am: the second
announcement.
Activating/deactivating the timer
Press
for selection menus.
Select using [
] and [OK]:
Service Set up
→
Answ. Machine
→
(required AM)
→
Settings
→
Time Control
→
Activate
or
Deactivate
Setting the start time (Monday - Friday)
Press
for selection menus.
Select using [
] and [OK]:
Service Set up
→
Answering mach.
→
Settings
→
Time Control
→
Mon - Fri
→
(required announcement)
.
Enter the start time and press [
'
].
Entering a second start time generates the end of the previous one.
Select using [
] and [OK]:
Save entry
.
Setting "Saturday - Sunday" mode
Press
for selection menus.
Select using [
] and [OK]:
Service Set up
→
Answering mach.
→
Settings
→
Time Control
→
Sat - Sun
→
(required announcement)
.
Picking up a call from an answering machine
To pick up a call from an answering machine, you need at least the "Incoming
only" access ("Accesses" on page 52).
Activating/deactivating automatic AM pickup
Press
for selection menus.
Select using [
] and [OK]:
Service Set up
→
Settings
→
System settings
→
AM
Auto. Pickup
Picking up a call
A call is recorded. You answer the call using the
D
key.
Direct (setting AM Auto. Pickup is active)
press
D
.
or
Indirect (setting AM Auto. Pickup is not active)
Press
D
.
Listen in on the call: press [OP.LIST], this allows you to listen in without the call-
er noticing.
Pick up the call: press [ACCEPT].
1.
2.
1.
2.
3.
Info
4.
1.
2.
1.
2.
1.
1.
2.G
3.