Siemens Gigaset 75 - Manual (Page 57)

53
Security settings
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01
Step
by
Step
Emergency numbers
Two or three emergency numbers (country-specific) are entered at the base
station. Five additional emergency numbers can be added to the following po-
sitions. The first position in the list is assigned the Siemens Hotline for your Gi-
gaset 3070isdn/3075isdn as standard. This preset can be overwritten.
Configuring new emergency numbers
Press for selection menus.
Select using [ ˆ ] and [OK]: Service Set up → Settings → Security .
Enter the base PIN and confirm with [OK].
Select using [ ˆ ] and [OK]: Emergency Nos.
→
.
Confirm [ ' ].
Select using [ ˆ ] and [OK]: Change number .
You can also delete or display an emergency number in this supplementary
menu.
Enter the new emergency number (max. 32 digits) and confirm [ ' ].
Select using [ ˆ ] and [OK]: Save entry .
You can also add a number from the directory to this supplementary menu as
an emergency number, or use a provider number (if supported).
Dialling an emergency number with active DSS and/or base/telephone
lock
The [EMERG.] softkey is displayed when DSS/telephone lock is active, see your
handset operating instructions.
Press any key or D .
Confirm EMERG.
Enter the emergency number.
Restoring the factory setting
You can reset the station to the factory setting. The handsets remain regis-
tered.
Press for selection menus.
Select using [ ˆ ] and [OK]: Service Set up
→
Settings
→
System settings
→
Spec. function → Default Reset .
Enter the system PIN of the base station (factory setting: 0000) and confirm
with [OK].
Select using [ ˆ ] and [OK]: Reset all .
Confirm prompt with [YES].
1.
2.
3.
4.
5.
6.
7.
8.
1.
2.
3.
1.
2.
3.
4.
5.