H2 - entering numbers in the telephone directory, H2 - rejecting calls for all msn groups, Entering numbers in the telephone directory – Siemens Gigaset 75 User Manual
Page 34: Rejecting calls for all msn groups, Making comfort calls, Direct call pickup activated ghidxow, Direct call pickup deactivated, Implementing "reject" for all msn groups
30
Making comfort calls
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619
giga3070KAP.fm
09.01.01
Step
by
Step
Entering numbers in the telephone directory
During a call, you can enter the number of the other party in the telephone di-
rectory, or add his/her name and then call them from the telephone directory.
Press
for the menu.
Select using [
] and [OK]:
Directories
→
Copy to Dir.
Press [OK].
Picking up a call while the answering machine is operating
Calls can be picked up even while the answering machine connected to Int21/
22 is switched on, playing your announcement or recording a message. Once
you pick up, the recording process is stopped.
Direct call pickup can be deactivated (see page 48) so that you can make out-
going calls even while the answering machine is switched on.
Direct call pickup activated
GHIDXOW
Press
D
or
V
and answer the call.
Direct call pickup deactivated
Press
D
or
V
and answer the call.
Press [OP.LIST].
Press [ACCEPT] and answer the call.
For call pickup, the answering machine and the internal subscriber called must
be assigned the same incoming MSN and the internal number 21/22 must be
assigned the device type
Answ. Machine
.
Rejecting calls for all MSN groups
You are conducting a call and a second call arrives at the same MSN. The call
is signalled acoustically and displayed for all members of this MSN group. By
pressing "REJECT", the caller hears the busy signal instead of the ring tone. The
call is no longer signalled for any group member. A displayed call number is en-
tered in the "Missed calls".
Implementing "reject" for all MSN groups
You are conducting a call and receive a second call at the same MSN.
Press the softkey: [REJECT]
.
Implementing "reject" for a subscriber in the group
You are conducting a call and receive a second call at the same MSN.
Press [REJECT].
The call is only deactivated for this subscriber; it continues to be signalled for
other subscribers in the call group. This function is only available if "reject for all
MSN groups" has not been configured.
1.
2.
3.
1.
1.
2.
3.
Info
1.
1.