H1.pb - security settings, H2 - change system pin, H2 - base lock – Siemens Gigaset 75 User Manual
Page 56: H2 - accesses, Security settings, Change system pin base lock accesses, Change system pin, Base lock, Accesses, Activating/deactivating the base lock
52
Security settings
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619
giga3070KAP.fm
09.01.01
Step
by
Step
Security settings
Change system PIN
The base PIN (Personal Identification Number) protects all your system settings
against unauthorized modifications. You Gigaset 3070isdn/3075isdn is deliv-
ered with the PIN 0000.
Press
for selection menus.
Select using [
] and [OK]:
Service Set up
→
Settings
→
Security
.
Enter the base PIN (factory setting:0000) and confirm with [OK].
Select using [
] and [OK]:
Change PIN
.
Repeat the new base PIN (max. 8 digits) and confirm with [OK].
Repeat the new base PIN and confirm with [OK].
Base lock
Using the base lock, you can "bar" outgoing calls from your Gigaset 3070isdn/
3075isdn base station. Incoming calls can still be taken.
Emergency calls are also possible, even if the base lock is activated.
Activating/deactivating the base lock
Press
for selection menus.
Select using [
] and [OK]:
Service Set up
→
Settings
→
Security
.
Enter the PIN and confirm with [OK].
Select using [
] and [OK]:
Base Lock
.
Accesses
You Gigaset 3070isdn/3075isdn supports three access levels:
●
Unrestricted
●
Incoming only
●
INT only
Emergency calls are possible, regardless of the access level.
Press
for selection menus.
Select using [
] and [OK]:
Service Set up
→
Settings
→
Security
.
Enter the base PIN and confirm with [OK].
Select using [
] and [OK]:
Accesses
→
(required internal subscriber)
→
[
'
]
→
(required access)
.
1.
2.
3.
4.
5.
6.
Note the new base PIN carefully. If you forget your PIN, the device will
need to be opened. In this case, contact the Siemens Hotline.
1.
2.
3.
4.
1.
2.
3.
4.