beautypg.com

H2.pb - setting external/internal enquiry calls, H2 - rejecting calls for all msn groups, Access options for the answering machine – Siemens Gigaset 75 User Manual

Page 28: Setting external/internal enquiry calls, Rejecting calls for all msn groups, Locking/unlocking isdn features, Configuring "reject" for all msn groups

background image

24

Locking/unlocking ISDN features

Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619

giga3070KAP.fm

09.01.01

Step

by

Step

Setting external/internal enquiry calls

You can set your telephone so that:

when conducting an enquiry with an external subscriber arising from an ex-
ternal call, the original caller is held in the central office so that your second
ISDN line remains free

when conducting an enquiry with an external subscriber arising from an ex-
ternal call, the original caller is held in the base station which means that
both ISDN lines are busy

The default setting is "Ext. Enq. Call".

Press

for selection menus.

Select using [

ˆ

] and [OK]:

Service Set up

Settings

ISDN settings

Int. Enq. Call

(

9LQIURQWRIPHQXLWHP

= ON / no

9

= OFF).

or

Select using [

ˆ

] and [OK]:

Service Set up

Settings

ISDN settings

Ext. Enq. Call

(

9LQIURQWRIPHQXLWHP

= ON / no

9

= OFF).

Confirm with [OK].

Answering machine - activating/deactivating direct call
pickup

By default, direct AM call pickup is activated.

If you deactivate direct call pickup, it is not possible to pick up a call directly
from an answering machine connected to Int21 or Int22 (announcement or call
recording active) by pressing the talk key (handset) or by lifting the handset
(corded telephone).

However, it is possible to initiate a new call while the answering machine is ac-
tive without deactivating the recording process (provided the second line is
free).

Press

for selection menus.

Select using [

ˆ

] and [OK]:

Service Set up

Settings

System settings

AM Auto. Pickup

(

9LQIURQWRIPHQXLWHP

= ON / no

9

= OFF).

Confirm with [OK].

Rejecting calls for all MSN groups

You are conducting a call and a second call arrives at the same MSN. The call
is signalled acoustically and displayed for all members of this MSN group. By
pressing "REJECT", the caller hears the busy signal instead of the ring tone. The
call is no longer signalled for any group member. A displayed call number is en-
tered in the "Missed calls".

Configuring "reject" for all MSN groups

Press

for selection menus.

Select using [

ˆ

] and [OK]:

Service Set up

Settings

ISDN settings

Reject All

.

Select using [

ˆ

] and [OK].

The selection is confirmed with

… .

1.

2.

2.

3.

1.

2.

3.

1.

2.

3.

This manual is related to the following products: