Connecting a pc to the base station – Siemens Gigaset 75 User Manual
Page 20
16
Connecting a PC to the base station
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619
giga3070KAP.fm
09.01.01
Step
by
Step
Updating Gigaset M101 Data for operation with Gigaset 3070/3075
Before you begin, make sure Gigaset M101 is already connected to the PC,
the configuration program is loaded, and the COM port is set correctly.
The firmware version must be
http://www.ic.siemens.com/mySiemens/full/
. Start the firmware update in the dialog
which appears by pressing the [Firmware Update] button. Proceed as follows:
1.
Open the browser, enter the addr
and download the update
file onto your hard disk.
2.
Start the Explorer and select the directory to which the update file was
downloaded (m101data_xyyy_.exe), where xyyy stands for the version
number.
3.
Navigate to m101data_xyyy_.exe under the selected path M101Data and
launch the program by double-clicking on it.
4.
Under the new path, open the readme.txt file and read the instructions pro-
vided there. Then launch setup.exe by double-clicking on it.
5.
In the dialog which appears, start the firmware update by pressing the
[Firmware Update] button.
6.
The old and new firmware versions are displayed.
7.
A message is output indicating when the update process is complete. If
you wish, you can repeat this procedure for other Gigaset M101 devices. If
two Gigaset M101 devices are interconnected, they must both have either
software version 1.yyy or 2.yyy. Ideally, all Gigaset M101 Data devices
should be updated with the latest software version.
8.
When updating from version 1.yyy to 2.yyy, the registration procedure
must be repeated for Gigaset M101 Data on Gigaset M101 Data and the
lines configured accordingly.