Siemens Gigaset 75 - Manual (Page 18)

14
Connecting a PC to the base station
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01
Step
by
Step
Operating Gigaset talk&surf with Windows 98, Win ME
Registering Gigaset M105 Data at Gigaset 3070/3075isdn
Proceed as follows:
1. Install Gigaset M105 Data
2. Start the Gigaset M105 Data configuration program via > Start > Programs
> Gigaset M100 Data > Gigaset Setup .
3. Select the window " Local adapter “ , a free registration location is selected.
4. Check that your Gigaset M105 Data has been set to the type Portable part
(default).
5. Set the Gigaset 3070/3075isdn to registration mode (press LED).
6. Click the Register button and enter the PIN of the partner station (default
0000).
7. Click OK . The registration procedure starts and the message " If the re-
quired base is ready for registration, the local adapter logs on. Check that
the base is ready for registration.
" appears on the screen.
The two devices are automatically synchronised. An entry now appears in
the
Registered adapter list.
8. Close the program with OK .
9. Restart your computer.
Once Gigaset M105 Data has been installed, the telephony driver for
your Gigaset 3070/3075isdn has to be updated. You have three op-
tions here:
1. You have not yet operated your Gigaset 3070/3075isdn on your PC via
the USB cable:
You must follow the instructions in the sections "PC connection via
USB" and "Installing Talk&surf Software" in the PC installation instruc-
tions provided with Gigaset 3070/3075isdn. When asked which port
is to be used for accessing Gigaset 3070/3075isdn, specify the virtual
COM port for Gigaset M105 Data.
2. You have operated Gigaset 3070/3075isdn on your PC via the USB ca-
ble before:
Install the talk&surf software again. Start the installation procedure for
the talk&surf software and when asked which port is to be used for
accessing Gigaset 3070/3075isdn, specify the virtual COM port for Gi-
gaset M105 Data
*
and continue with the installation.
3. You have operated your Gigaset 3070/3075 isdn on your PC via the
USB cable before and you are an experienced PC user:
Reset the telephony driver by selecting the following:
> Start > Set-
tings > Control Panel > Telephony . Select the Telephony Drivers tab
here. Then select the DECT/ISDN TAPI Service Provider and click on
Configure . Click on Port , then on Serial and select the virtual COM
port for Gigaset M105 Data (see footnote on page 15). Confirm twice
with
OK and then Close .