beautypg.com

H1.pb - system settings, H2 - configuring music-on-hold, H2 - audio settings – Siemens Gigaset 75 User Manual

Page 29: System settings, Configuring music-on-hold audio settings, Configuring music-on-hold, Audio settings, Assigning a ringer melody to an msn

background image

25

System settings

Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619

giga3070KAP.fm

09.01.01

Step

by

Step

System settings

Configuring music-on-hold

The caller hears music-on-hold when put on hold by the base station rather
than the exchange (e.g. in the case of internal transfer). The following settings
can be selected:

Press

for selection menus.

Select using [

ˆ

] and [OK]:

Service Set up

Settings

System settings

Music on Hold

.

Select using [

ˆ

] and [OK]: required type.

This feature is also available when a call is held via 2 B-channels, see section
"Conducting a call externally or via a second B-channel" on page 23.

Audio settings

With this setting you can define a ringer melody for each MSN, valid for all
called handsets. Independent of this setting, you can also select a different
ringer melody for the handset for internal calls.

Assigning a ringer melody to an MSN

Each newly assigned MSN is automatically assigned its own ringer melody.
This setting enables you to change the type of melody.

Press

for selection menus.

Select using [

ˆ

] and [OK]:

Service Set up

Settings

ISDN settings

Set up MSN

.

Select using [

ˆ

] and [

'

] :

(required MSN)

.

Select using [

ˆ

] and [OK] :

Ringer Melody

.

Select using [

] or [

] one melody from 0 to 9 and confirm with [OK].

Configuring an internal ringer melody for a handset

Press

for selection menus.

Select using [

ˆ

] and [OK] :

Settings

Audio

Ringer Melody

.

Select using [

] or [

] one melody – this melody is generated in the handset

self and played back directly – confirm your selection with [OK].

Internal

Integrated default melody

Off

Music-on-hold via connection 21 or 22. This menu item only ap-
pears if "Ext. music/hold" is selected when the device type is set
to connection 21 or 22.

1.

2.

3.

1.

2.

3.

4.

5.

1.

2.

3.

This manual is related to the following products: