Siemens Gigaset 75 - Manual (Page 67)

63
Operation with other devices
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01
Step
by
Step
Internal collective call
If there are several internal subscribers registered at the base station, you can
call all of them simultaneously by means of a collective call. This is possible
only if automatic line seizure is deactivated (see page 60).
External/internal enquiry
● You can call an H[WHUQDO party during an H[WHUQDO call.
● You can call an LQWHUQDO party during an H[WHUQDO call.
External enquiry
Ending the call
Internal enquiry
/ Lift the handset.
All registered handsets are called.
# You are connected to the first subscriber that answers the
collective call.
# You are engaged in an external call.
4 Press this key. The external caller is put on hold.
" Press this key.
J Enter the desired external number.
#
You are connected to the dialled subscriber. If you wish, you
can use the R key to toggle between the two parties.
;
Hang up to end the current call. You are then recalled to the
first call.
# You are engaged in an external call.
4 Press these keys. The external caller is put on hold.
J Enter the desired internal number.
#
You are connected to the dialled party. If you wish, you can
use the R key to toggle between the two parties
4
Press this key. This ends the call with the internal subscriber
and reconnects you to the external caller.
If the internal subscriber does not answer, you can return to the
caller on hold by pressing the R key.