F18 - software version request, F50 - gps receiver lla/xyz position, F18 – software version request – Symmetricom XL-GPS User Manual
Page 59: F50 – gps receiver lla/xyz position, Command line, Warning, Xl-gps responds (example), Xl-gps responds, F18
997-01530-01, Rev. C-25, Jan 2008
49
2
5
1
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
XL-GPS responds (example):
F13 TIME ERROR -0.002932863
F18 – Software Version Request
Use function F18 to display the current firmware version numbers of the firmware in the XL-GPS:
•
Bootloader
•
Software (firmware)
•
File System
•
Project Rev #
•
FPGA
Command Line
Use Command Line Function F18 to obtain the system’s firmware version information.For example,
enter:
F18
XL-GPS responds:
F18 BOOTLOADER 192-8000
SOFTWARE 192-8001
FILE SYSTEM 192-8002v1.80
PROJ REV # 1.80
FPGA # 184-8000V50
F50 – GPS Receiver LLA/XYZ Position
Use function F50 to display the current GPS position. Specifically, Use function F50 to:
•
Select the positional coordinate system, Latitude Longitude Altitude (LLA) or XYZ (Earth-
Centered, Earth-Fixed XYZ coordinates based on WGS 84).
•
If LLA is selected, Altitude Mode shows the elevation in meters (WGS 84).
Warning:
This GPS receiver is optimized for timing versus position accuracy. Therefore,
position information on this unit is not valid for navigation and other critical
applications.