Xl-gps-generated messages, Error messages, Xl-gps-generated messages error messages – Symmetricom XL-GPS User Manual
Page 121: Error 01 value out of range, Error 02 syntax, Error 03 bad/missing field, Error 04 - bad data/timeout condition, Error: invalid command, Error: can’t create netdevice ip
997-01530-01, Rev. C-25, Jan 2008
111
2
5
1
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
7: XL-GPS-Generated Messages
Error Messages
ERROR 01 VALUE OUT OF RANGE
You entered a command using the correct format that contained a value, probably numeric, that was
outside the range of acceptable values.
Recovery Action: Re-enter the command using an acceptable value.
ERROR 02 SYNTAX
You entered a valid command, but using the wrong format.
Recovery Action: Re-enter the command, using the correct format.
ERROR 03 BAD/MISSING FIELD
You entered a command that lacks a required field.
Recovery Action: Re-enter the command, using the required fields.
ERROR 04 - BAD DATA/TIMEOUT CONDITION
The GPS option card did not respond to the XL-GPS soon enough.
Recovery Action: Re-enter the command, using the required fields.
ERROR: Invalid Command
You have entered an invalid command.
Recovery Action: Consult the manual for the correct command and re-enter.
ERROR: Can’t create netdevice
The XL-GPS can not create the device needed to map the host to a drive.
Recovery Action: Restart the Unit. If this error message persists, contact Symmetricom Technical
Customer Service.
ERROR: Can’t set host
You have incorrectly entered a parameter, or there is no room currently in the Host table for another IP
Address.