Symmetricom XL-GPS - Manual (Page 112)

102 997-01530-01, Rev. C-25, Jan 2008
S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S
1
For example, enter:
F113
The XL-GPS displays the current configuration (example):
F113 DISABLE
Or
F113 FREQ MEAS 1MHZ 50 000001
To set the J3 Input Configuration, enter a character string using the same formats as the preceding
XL-GPS responses
. Only valid values are accepted.
To disable F113, enter:
F113 DISABLE
Or, to enable Freq Meas of a 1 MHz input with a 50 Ω input impedance every 1 seconds, enter:
F113 FREQ MEAS 1MHZ 50 1
To all three of the above examples, XL-GPS responds:
OK
If enabling Freq Meas, display the Freq Meas measurements using the following format:
F113SHOW
XL-GPS responds using the following format:
Intervalisseconds
+#.######e-##
FREQ MEAS
= ASCII character string "FREQ MEAS" to set J3 to make frequency measurements
= ASCII space character one or more.
= FREQ MEAS Input Frequency: 1MHZ, 5MHZ, 10MHZ
= Input Impedance: 1K or 50
= Frequency Measurement Interval. This is the gate time of the measurement. Range: [000001,
999999] in seconds.
= line terminator, either a carriage return and line feed for output strings or a carriage return only for
input strings.
F
= ASCII character F.