Symmetricom XL-GPS - Manual (Page 101)

997-01530-01, Rev. C-25, Jan 2008 91
2
5
1
S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S
F100 PI – PING
Use function F100 PI to ping a remote host to see if it is reachable. If no IP Address is provided, F100 PI
uses the XL-GPS’s own IP Address, and tests whether the XL-GPS’s network port has a good network
connection.
To ping a known host, enter:
F100 PI
For example:
F100 PI 206.254.000.021
The unit responds (example):
PING 206.254.000.021: REMOTE HOST FOUND.
or
PING 206.254.000.021 : REMOTE HOST NOT FOUND.
To test if the XL-GPS’s network port has a good connection, enter the following using in a serial port
session:
>f100 PI
XL-GPS responds:
PING : REMOTE HOST FOUND.
or it responds:
PING : REMOTE HOST NOT FOUND.
F100 PN – Change User Name
Use function F100 PN to change a user name. In a network port session, F100 PN changes the name of
the user you logged in as; operator or guest. In a serial port session, F100 PN changes the name of the
operator
user. See “Command Line Interface” on page 29.
To change the user name, enter:
F100PN