Siemens Gigaset C450IP User Manual

Page 73

Appendix

Gigaset C450 IP / Greek eng / A31008-M1713-T151-3-8U19 / appendix.fm / 24.9.07

Ver

on 4, 16.

09.20

0x486 The called party is busy.
0x487 General faults:

The call was interrupted before a call

was established. The status code con-

firms receipt of the interruption sig-

nal.

0x488 The server cannot process the query

because the data entered in the

media description is not compatible.

0x491 The server notifies that the query will

be processed as soon as a previous

query has been completed.

0x493 The server rejects the query because

the phone cannot decrypt the mes-

sage. The sender has used an encryp-

tion method that neither the server

nor the receiver phone can decrypt.

0x500 The proxy or the receiving device has

discovered a fault while executing

the query, which makes further exe-

cution of the query impossible. In this

case, the caller or the phone displays

the fault and repeats the query after

a few seconds. The number of sec-

onds after which the query can be

repeated may be transmitted to the

caller or phone by the receiving

device.

0x501 The query cannot be processed by

the recipient because the recipient

does not have the functionality that

the caller requires. If the recipient

understands the query but does not

process it because the sender does

not have the necessary rights or the

query is not permitted in the current

context, a 405 is sent instead of 501.

0x502 In this case, the receiving device that

transmits this error code is a proxy or

a gateway and has received an invalid

response from its gateway via which

this query is to be processed.

0x503 The query cannot currently be proc-

essed by the receiving device or the

proxy because the server is either

overloaded or is being serviced. If it is

possible for the query to be repeated

in the foreseeable future, the server

informs the caller or the phone of

this.

Status

code

Meaning

0x504 Time limit at the gateway
0x505 The server rejects the query because

the indicated version number of the

SIP protocol does not at least concur

with the version that the server or the

SIP device uses that is involved in this

query.

0x515 The server rejects the query because

the message exceeds the maximum

permitted size.

0x600 The called party is busy.
0x603 The called party has rejected the call.
0x604 The called URI does not exist.
0x606 The communication settings are not

acceptable.

0x701 The called party has hung up.
0x703 Connection interrupted because of

time-out.

0x704 Connection interrupted because of a

SIP error

0x705 Wrong dialling tone
0x706 No connection established
0x751 Busy tone:

No codec match between the calling

and called subscribers.

0x810 General Socket Layer Error: User is

not authorised.

0x811 General Socket Layer Error:

Wrong Socket Number

0x812 General Socket Layer Error: Socket is

not connected.

0x813 General Socket Layer Error:

Memory error

0x814 General Socket Layer Error: Socket

not available - check IP settings/con-

nection problem/VoIP setting incor-

rect

0x815 General Socket Layer Error:

Illegal application on the socket inter-

face.

Status

code

Meaning