Activating/deactivating advisory tones, Setting the battery low beep, Using the handset as an alarm clock – Siemens Gigaset C450IP User Manual
Page 45: Activating/deactivating the alarm clock, Setting the wake up time, When the alarm clock rings, Restoring the handset default settings
44
Handset settings
Gigaset C450 IP / Greek eng / A31008-M1713-T151-3-8U19 / settings_bs_hs_pabx.fm / 24.9.07
Ver
si
on 4, 16.
09.20
05
Activating/deactivating advisory tones
§Menu§
¢
Audio Settings
¢
Advisory Tones
Select and press
§OK§
(
‰ = on).
All advisory tones are activated or deacti-
vated.
Setting the battery low beep
§Menu§
¢
Audio Settings
¢
Battery Low
On
/
Off
/
During Call
Select and press
§OK§
(
‰ = on).
The battery low beep is acti-
vated or deactivated or sounds
during a call.
Using the handset as an
alarm clock
Activating/deactivating the alarm
clock
§Menu§
¢
Alarm Clock
¢
Activation
(
‰ = on)
Or:
g
Press the alarm clock key.
After you activate the alarm clock, the
menu for setting the wake up time opens
automatically (page 44).
If the alarm clock is set, the wake up time
appears with the
l icon in the display
instead of the date.
Setting the wake up time
§Menu§
¢
Alarm Clock
¢
Wake up time
~
Enter the wake up time in
hours and minutes, then press
§OK§
.
When the alarm clock rings…
Alarm repeat after 5 minutes
§Snooze§
Press the display key or any
key.
If you press
§Snooze§
three times the alarm
clock switches off for 24 hours.
Switching off the alarm clock for 24 hours
§Off§
Press the display key.
Restoring the handset default
settings
Each individual handset setting is reset, in
particular the language, display, volume,
ringer and alarm clock settings (see from
page 42). The last number redial list is
cleared.
§Menu§
¢
Settings
¢
Handset
¢
Reset Handset
§OK§
Press the display key to con-
firm.
a Press
and
hold (idle status).
Cancel the reset with
a.