Writing/sending an sms, Sms status report, Draft message list – Siemens Gigaset C450IP User Manual
Page 35
34
SMS (text messages)
Gigaset C450 IP / Greek eng / A31008-M1713-T151-3-8U19 / sms_neutral.fm / 24.9.07
Ver
si
on 4, 16.
09.20
05
Writing/sending an SMS
An SMS may contain up to 160 characters.
Writing/sending SMS
§Menu§
¢
SMS
¢
Write Message
~
Write an SMS. For how to enter
the text, see page 77.
§Menu§
Send Text
Select and press
§OK§
.
s / ~
Enter the number with dialling
code (including your local area
code) from the directory or key
it in manually, and press
§OK§
.
For SMS to an SMS mailbox:
put the mailbox ID at the end
of the number.
The SMS is sent.
SMS status report
Precondition: Your network provider sup-
ports this feature.
If you have activated the status report, you
will receive an SMS with a confirmation
message after sending.
Activating/deactivating a status report
§Menu§
¢
SMS
¢
Settings
Status Report
Select and press
§OK§
(
‰ = on).
Reading/deleting a status report
¤
Open the incoming message list
(page 35) and then:
q
Select SMS with the
State OK
or
State NOK
status.
§Menu§
Read SMS
Select and press
§OK§
to read
the status report. Scroll using
q.
Or:
§Menu§
Delete Entry
Select and press
§OK§
to delete
the status report.
Draft message list
In the draft message list, you can save,
edit later and send an SMS.
Saving an SMS in the draft message list
§Menu§
¢
Save Text
Opening the draft message list
§Menu§
¢
SMS
¢
Outgoing
The first entry in the list is displayed, e.g.:
01/02: Current number/total number of SMS
messages
Reading or deleting individual SMS
messages
¤
Open the draft message list.
q
Select SMS.
§Menu§
Read SMS
Select and press
§OK§
to read
the message. Scroll in the SMS
using
q.
Or:
§Menu§
Delete Entry
Select and press
§OK§
to delete
the message.
Writing an SMS
You are reading an SMS in the draft mes-
sage list.
§Menu§
Press the soft key.
Write Message
Write and then send a new SMS
(page 34) or save.
Please note:
If you are interrupted by an external call while
writing an SMS, the text is automatically saved
in the draft message list.
Saved
01/02
11.03.06
19:27
§Back§
U
§Menu