Activating/deactivating the gigaset.net connection, Setting dtmf signalling for voip, R (s. 63) – Siemens Gigaset C450IP User Manual

Page 64

Web configurator

Gigaset C450 IP / Greek eng / A31008-M1713-T151-3-8U19 / web_server.fm / 24.9.07

Ver

on 4, 16.

09.20

The phone establishes a connection with

the Siemens server on the Internet. The

download procedure has several steps:

Click on

Next

From the list, select the country for

which the list of VoIP providers is to be

loaded.

Click on

Next

Select a VoIP provider from the list. If

your provider is not included in the list,

select

Other Provider

. You will then have

to enter all the VoIP data manually

(page 57).

Click on

Finish

The data for the provider selected will be

loaded onto your phone.

Activating/deactivating the

Gigaset.net connection

Your phone is assigned a Gigaset.net

phone number on delivery. As soon as you

have connected your phone to the Inter-

net, you can make calls using the

Gigaset.net and receive calls from other

Gigaset.net subscribers, provided that

your Gigaset.net connection has been

activated. You can deactivate the

Gigaset.net connection.

Open the following Web page:

Settings

Telephony

Connections

The list of connections will be displayed

(see Figure 3 on page 56).

In the

Gigaset.net

area: use the option in

the

Active

column to activate ( ) or

deactivate ( ) the Gigaset.net connec-

tion.

Setting DTMF signalling for VoIP

DTMF signalling, for example is required

for playing and controlling some network

mailboxes via digit codes.
For VoIP specify how key codes are to be

converted and sent as DTMF signals: as

audible information in the voice channel

or as a "SIP Info" message.
Ask your VoIP provider which type of

DTMF transmission it supports.

Open the following Web page:

Settings

Telephony

Advanced Settings

In the

DTMF over VoIP Connections

area,

make the required settings for sending

DTMF signals. Bear in mind your provider's

guidelines.

Activate

Audio

RFC 2833

if DTMF sig-

nals are to be transmitted acoustically

(in voice packages).

Activate

SIP Info

if DTMF signals are to

be transmitted as code.

Now click on

Set

to save your settings.