Siemens Gigaset C450IP - Manual (Page 58)

57
Web configurator
Gigaset C450 IP / Greek eng / A31008-M1713-T151-3-8U19 / web_server.fm / 24.9.07
Ver
si
on 4, 16.
09.20
05
Configuring the VoIP connection
Open the Web page:
¤
Open the following Web page:
Settings
¢
Telephony
¢
Connections .
¤
Click on the Edit button next to the VoIP
connection.
This will open a Web page where you can
make the settings that your phone needs
to access your provider's VoIP server.
The following areas are displayed:
1.
IP Connection (page 57)
2. Personal Provider Data (page 57)
3. Call Forwarding (page 58)
4. General Provider Data (page 58)
5. Listen ports (page 59)
6. Network (page 59)
7. Voice codecs (page 61)
¤
Make the settings on the Web page.
¤
Save them in the phone, see page 62.
¤
Activate the connection if necessary,
see page 62.
Area: IP Connection
Provider
The name of your VoIP provider will be
shown if you have already selected it.
If necessary, click on the
Select VoIP Pro-
vider button to select a provider and to
start downloading the general data for
the VoIP provider from the Internet if
required. To find out how to do this,
please read "Selecting the VoIP provider
and downloading the VoIP provider
data" on page 62.
Area: Personal Provider Data
Enter the configuration data that is neces-
sary for accessing your VoIP provider's SIP
service. You will receive this data from
your VoIP provider.
Authentication Name
Specify the registration or authentica-
tion ID agreed with your VoIP provider.
The registration ID serves as the access
ID that your phone must specify when
registering with the SIP proxy/registrar
server. The Authentication Name is
mainly identical to the Username ,
i.e. to your Internet phone number.
Authentication password
Enter the password that you have
agreed with your VoIP provider in the
Authentication password field. The phone
needs the password when registering
with the SIP proxy/registrar server.
Username
Enter the caller ID for your VoIP pro-
vider account. This ID is usually identi-
cal to the first part of your SIP address
(URI, your Internet phone number).
Example: If your SIP address is
"[email protected]", enter
"987654321" in Username .
Please note:
You can use the Hide Advanced Settings button
to hide areas 3 to 7. This prevents you from,
e.g. making accidental changes to the data
after downloading the general data for your
VoIP provider.
You can use the
Show Advanced Settings button
to show these general areas again at any time.
Please note:
– If you click on the Select VoIP Provider but-
ton, any changes that have been made to
the Web page will be saved and checked.
Values may need to be corrected before the
Select VoIP Provider operation is started.
– The downloaded VoIP provider data will be
entered in the General Provider Data
(page 58) and Network (page 59) areas, so
that, generally speaking, no further set-
tings need to be made.
If the general data for your VoIP provider is
not available for download, you will need to
make these settings yourself as described
below.