beautypg.com

Web configurator, Configuring the phone via your pc, Connecting your pc to the web configurator – Siemens Gigaset C450IP User Manual

Page 52: Registering, setting the web configurator language

background image

51

Web configurator

Gigaset C450 IP / Greek eng / A31008-M1713-T151-3-8U19 / web_server.fm / 24.9.07

Ver

si

on 4, 16.

09.20

05

Web configurator

The Web configurator is the Web interface

for your handset. It allows you to make the

settings for your phone's base station via

your PC's Web browser.

Configuring the phone via your
PC

Preconditions:

u

A standard Web browser is installed on

the PC, e.g. Internet Explorer version

6.0 or higher, or Firefox version 1.0.4 or

higher.

u

The phone and PC are connected to

each other via a router.

With the Web configurator on your phone

you have the following options:

u

Configure your phone access to the

local network (IP address, gateway to

the Internet).

u

Configure your phone for VoIP.

u

Set the data server for firmware

updates and load new firmware onto

the phone if necessary.

u

Obtain information about your phone's

status (firmware version, MAC address

etc.)

Connecting your PC to the
Web configurator

¤

Launch the Web browser on your PC.
Precondition: The settings of an

available firewall on the PC allow the PC

and telephone to communicate with

each other.

¤

Enter the phone's IP address in the

address field of the Web browser,

e.g. http://192.168.1.10.
Your phone's IP address can change if

you have activated dynamic IP address

assignment (page 54).
You can check the phone's current

IP address on the handset (page 49).

¤

Press the return key.

A connection is established to the phone's

Web configurator.

Registering, setting the Web
configurator language

Once you have successfully established

the connection, the Web page

Login

will

be displayed in the Web browser.
You can select the language you want the

menus and Web configurator dialogs to be

displayed in. The language that is cur-

rently selected is displayed in the top field

of the Web page.

¤

If necessary, click on

to open the list

of available languages.

¤

Select the language.

¤

In the bottom field of the Web page,

enter your phone's system PIN (default

setting: 0000) to access the Web con-

figurator functions.

¤

Click on

OK

.

Once you have successfully registered, a

Home

opens with general information on

the Web configurator.

Please note:

Depending on your VoIP provider, it is possible

that you will be unable to change individual

settings in the Web configurator.

Please note:

– The phone is not blocked while you make

your settings in the Web configurator. You

can also use your phone to make calls or

change base station or handset settings on

your handset at the same time.

– While you are connected to the Web config-

urator, it is blocked to other users. It cannot

be accessed by more than one user at any

time.