Display with cnip, Handsfree talking, Activating/deactivating handsfree mode – Siemens Gigaset C450IP User Manual
Page 21
20
Making calls with VoIP and the fixed network
Gigaset C450 IP / Greek eng / A31008-M1713-T151-3-8U19 / telephony.fm / 24.9.07
Ver
si
on 4, 16.
09.20
05
Display with CNIP
Precondition: Call from the fixed net-
work.
If you have CNIP, then the name (town)
that is registered with your network pro-
vider for that calling number will also be
displayed. If the caller's number is saved in
your directory then the directory entry will
be shown.
1 Caller's number
2 Name and town (IP is displayed for calls
made via the Internet)
The display shows:
u
External Call
, if no number is trans-
mitted.
u
Withheld
, if the caller has withheld Call-
ing Line Identification.
u
Unavailable
, if the caller has not
arranged Calling Line Identification.
Handsfree talking
In handsfree mode, instead of holding the
handset to your ear you can put it down,
e.g. on the table in front of you, to allow
others to participate in the call.
Activating/deactivating handsfree
mode
Activating while dialling
~ d
Enter number and press
briefly/press and hold the
handsfree key to select the
¤
You should inform your caller before
you use the handsfree function so that
they know someone else is listening.
Switching between earpiece and
handsfree mode
d
Press the handsfree key.
Switch handsfree on and off during a call.
If you wish to place the handset in the
charging cradle during a call:
¤
Press and hold the handsfree key
d
while placing the handset in the charg-
ing cradle. If the handsfree key
d does
not light up, press the key again.
For how to adjust the loudspeaker vol-
1234567890
Anna Fielding,
London
IP
§Menu
2
1