Conducting the firmware update locally, Starting the firmware update, Activating voip status message display – Siemens Gigaset C450IP User Manual

Page 67

Web configurator

Gigaset C450 IP / Greek eng / A31008-M1713-T151-3-8U19 / web_server.fm / 24.9.07

Ver

on 4, 16.

09.20

Conducting the firmware update

locally

Precondition: A Web server runs on the

local PC (e.g. Apache).

First, load the desired version of the

firmware from the Internet onto a local

PC.

In the

User defined firmware file

field

enter the IP address of the PC in your

local network and the complete path

and name of the firmware file on the

PC. Example: 192.168.2.105/C450IP/

Firmware_Datei.bin.

Click on

Set

to save the changes.

This setting is automatically used for the

subsequent firmware update. The Inter-

net server URL stays saved and is re-used

for further firmware updates. If you want

to use a local PC again for another update,

then you have to re-enter the IP address

and file name.

Starting the firmware update

Preconditions:

No calls are being made via the fixed

network or VoIP.

There is no connection between regis-

tered handsets.

The base station menu is not open in

any of the handsets.

Click on

Update Firmware

The firmware is updated. This process can

take up to 3 minutes.

Activating/deactivating the
automatic version check

When the version check is activated, the

phone checks on a daily basis whether the

Siemens configuration server is carrying a

new version of the phone firmware or of

the file with the general settings for your

VoIP provider.
If a new version is available, a notification

is sent to the handset and the message key

flashes. You can then carry out an auto-

matic update of the firmware (page 46) or

of the VoIP provider settings (page 47).

Open the following Web page:

Settings

Miscellaneous

Click on the

Yes

option next to

Automatic check for software/profile
updates

to activate the automatic

version check.
Click on

if you do not want a version

check to be carried out.

Click on

Set

to save the changes.

Activating VoIP status message
display

Display VoIP status messages on your

handset when there are VoIP connection

problems. These messages give you infor-

mation on the status of a connection and

contain a provider-specific code that helps

the service team when they are analysing

the problem.

Open the following Web page:

Settings

Miscellaneous

Click on the

Yes

option after

Show VoIP

status on handset

to activate status mes-

sage display
If you click on

, no VoIP status mes-

sages are displayed.

Click on

Set

to save the changes.

Please note:

If an error arises during a firmware update

from a local PC, the most recent version of the

firmware is automatically downloaded from

the Internet.

Please note:

You can also start the firmware update on the

handset (page 46).